The screw-in depth of the thread must be at least 1.5 times the thread diameter.
(+) = extend (loosen)
(-) = shorten (tighten)
The marking on the shaft is to identify the left-hand thread.
Suitable for the circular wire strand ropes of the 10820 and 10830 series.
The assembly with open spiral strands of the 10810 series is only possible with diameters 2 – 6 mm.
| Nr. | ø | a | b | e | f | g | h | ø d1 | ø d2 | – | + | kg | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30812-0300-01 | 3 | M 5 | 94 | 6 | 12 | 7.5 | 12.5 | 5 | 7 | 8 | 5 | 0,0320 | |
| 30812-0300-02 | 3 | M 5 | 110 | 6 | 12 | 7.5 | 12.5 | 5 | 7 | 15 | 13 | 0,0400 | |
| 30812-0400-01 | 4 | M 6 | 95 | 6 | 12 | 7.5 | 12.5 | 5 | 8 | 8 | 3 | 0,0370 | |
| 30812-0400-02 | 4 | M 6 | 120 | 6 | 12 | 7.5 | 12.5 | 5 | 8 | 15 | 11 | 0,0450 | |
| 30812-0500-01 | 5 | M 6 | 105 | 6 | 12 | 7.5 | 12.5 | 5 | 8 | 8 | 3 | 0,0350 | |
| 30812-0500-02 | 5 | M 6 | 128 | 6 | 12 | 7.5 | 12.5 | 5 | 8 | 15 | 11 | 0,0440 | |
| 30812-0600-01 | 6 | M 8 | 125 | 7 | 13 | 10 | 14.5 | 6 | 10 | 10 | 3 | 0,0670 | |
| 30812-0600-02 | 6 | M 8 | 162 | 7 | 13 | 10 | 14.5 | 6 | 10 | 25 | 13 | 0,0840 | |
| 30812-0800-01 | 8 | M 10 | 204 | 9 | 15 | 11 | 18 | 8 | 13 | 30 | 10 | 0,1860 |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.
