Crimped loops similar to EN 13411-3.
Crimped loops similar to EN 13411-3.
| Nr. | ø | b2 | k | ø d2 | ø d4 | s | kg | |
|---|---|---|---|---|---|---|---|---|
| 20804-0200 | 2 | 10 | 4 | 8 | 7 | 30 | 0,0020 | |
| 20804-0300 | 3 | 13 | 5 | 10 | 9 | 45 | 0,0040 | |
| 20804-0400 | 4 | 16 | 6 | 11 | 13 | 60 | 0,0120 | |
| 20804-0500 | 5 | 20 | 7 | 13 | 15 | 75 | 0,0180 | |
| 20804-0600 | 6 | 27 | 9 | 16 | 13 | 90 | 0,0200 | |
| 20804-0800 | 8 | 36 | 12 | 20 | 20 | 120 | 0,0400 | |
| 20804-1000 | 10 | 45 | 15 | 26 | 22 | 150 | 0,0710 | |
| 20804-1200 | 12 | 54 | 17 | 27 | 27 | 180 | 0,1100 | |
| 20804-1600 | 16 | 80 | 21 | 36 | 36 | 240 | 0,2920 | |
| 20804-2000 | 20 | 89 | 31 | 45 | 41 | 320 | 0,2920 |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.