Assembly including both internal threads pressed.
The screw-in depth of the threads must be at least 1.5 times the thread diameter.
(+) = extend (loosen)
(-) = shorten (tighten)
The marking on the shaft is to identify the left-hand thread.
Assembly including both internal threads pressed.
The screw-in depth of the threads must be at least 1.5 times the thread diameter.
(+) = extend (loosen)
(-) = shorten (tighten)
The marking on the shaft is to identify the left-hand thread.
| Nr. | ø | a | b1 | b2 | ø d | sw | – | + | kg | |
|---|---|---|---|---|---|---|---|---|---|---|
| 30816-1000-01 | 10 | M12 | 502 | 190 | 18 | 8 | 82 | 34 | 0,6930 | |
| 30816-1000-02 | 10 | M14 | 525 | 200 | 20 | 10 | 84 | 28 | 0,8310 | |
| 30816-1200-01 | 12 | M16 | 632 | 238 | 24 | 12 | 104 | 42 | 1,5280 | |
| 30816-1600-01 | 16 | M20 | 758 | 288 | 30 | 15 | 124 | 50 | 2,7530 |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.