The frames are manufactured according to individual dimensions.
Frame type Inviss-C is available with Webnet of the rope diameters 1,5 and 2 mm. The mesh size of the net is freely selectable. Special shapes with specific geometries require a prior feasibility check.
The net is attached to the frame within the profile groove, without wrapping around the tube. The specification of the frame, net, and frame size is done according to project-specific
| Nr. | a | b | k | ST ø mm | kg | |
|---|---|---|---|---|---|---|
| 30924-2020-50 | 20 | 20 | 1.5 | 10 | – | |
| 30924-2040-50 | 20 | 40 | 1.5 | 10 | – | |
| 30924-2550-50 | 25 | 50 | 1.5 | 12 | – | |
| 30924-3030-50 | 30 | 30 | 1.5 | 12 | – | |
| 30924-3060-50 | 30 | 60 | 1.5 | 12 | – | |
| 30924-4020-50 | 40 | 20 | 1.5 | 12 | – | |
| 30924-4040-50 | 40 | 40 | 2 | 12 | – | |
| 30924-5025-50 | 50 | 25 | 1.5 | 12 | – | |
| 30924-6030-50 | 60 | 30 | 1.5 | 12 | – |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.
