We manufacture the nets to fit your specific measurements and shapes.
Cutting for non-rectangular geometries with appropriate cutting allowance.
Webnet edge finishing offers various options, with Type H24 and Type V24 being the standard versions. Selection depends on the primary structure's construction and assembly requirements.
Please refer to further instructions in the Webnet catalog and assembly manual.
| Nr. | ø | MW | ML | kg | |
|---|---|---|---|---|---|
| 20260-0150-025 | 1.5 | 25 | 44.61 | 0,8900 | |
| 20260-0150-030 | 1.5 | 30 | 60.18 | 0,6900 | |
| 20260-0150-040 | 1.5 | 40 | 74.76 | 0,5100 | |
| 20260-0150-050 | 1.5 | 50 | 89.74 | 0,4100 | |
| 20260-0150-060 | 1.5 | 60 | 105.66 | 0,3500 | |
| 20260-0150-070 | 1.5 | 70 | 124.58 | 0,2900 | |
| 20260-0150-080 | 1.5 | 80 | 139.56 | 0,2600 | |
| 20260-0150-100 | 1.5 | 100 | 174.6 | 0,2100 | |
| 20260-0150-120 | 1.5 | 120 | 208.48 | 0,1700 | |
| 20260-0150-140 | 1.5 | 140 | 243.06 | 0,1500 | |
| 20260-0150-160 | 1.5 | 160 | 277.75 | 0,1300 | |
| 20260-0150-180 | 1.5 | 180 | 313.56 | 0,1200 | |
| 20260-0150-200 | 1.5 | 200 | 349.88 | 0,1000 | |
| 20260-0150-250 | 1.5 | 250 | 432.43 | 0,0800 | |
| 20260-0200-040 | 2 | 40 | 74.8 | 0,9500 | |
| 20260-0200-050 | 2 | 50 | 89.72 | 0,7700 | |
| 20260-0200-060 | 2 | 60 | 105.72 | 0,6500 | |
| 20260-0200-070 | 2 | 70 | 122.35 | 0,5500 | |
| 20260-0200-080 | 2 | 80 | 139.57 | 0,4800 | |
| 20260-0200-100 | 2 | 100 | 173.48 | 0,3900 | |
| 20260-0200-120 | 2 | 120 | 207.52 | 0,3200 | |
| 20260-0200-140 | 2 | 140 | 243.06 | 0,2800 | |
| 20260-0200-160 | 2 | 160 | 276.27 | 0,2400 | |
| 20260-0200-180 | 2 | 180 | 313.17 | 0,2200 | |
| 20260-0200-200 | 2 | 200 | 346.8 | 0,1900 | |
| 20260-0200-250 | 2 | 250 | 433.35 | 0,1600 | |
| 20260-0300-040 | 3 | 40 | 73.86 | 2,3400 | |
| 20260-0300-050 | 3 | 50 | 88.26 | 1,9100 | |
| 20260-0300-060 | 3 | 60 | 105.66 | 1,6000 | |
| 20260-0300-070 | 3 | 70 | 122.46 | 1,3600 | |
| 20260-0300-080 | 3 | 80 | 139.49 | 1,1900 | |
| 20260-0300-100 | 3 | 100 | 173.32 | 0,9600 | |
| 20260-0300-120 | 3 | 120 | 207.26 | 0,8000 | |
| 20260-0300-140 | 3 | 140 | 241.74 | 0,6800 | |
| 20260-0300-160 | 3 | 160 | 276.52 | 0,6000 | |
| 20260-0300-180 | 3 | 180 | 310.96 | 0,5300 | |
| 20260-0300-200 | 3 | 345.87 | 200 | 0,4800 | |
| 20260-0300-250 | 3 | 433.56 | 250 | 0,3900 | |
| 20260-0300-300 | 3 | 517.28 | 300 | 0,3200 | |
| 20260-0300-400 | 3 | 685.35 | 400 | 0,1600 | |
| 20260-0400-060 | 4 | 60 | 104 | 2,9800 | |
| 20260-0400-070 | 4 | 70 | 121.01 | 2,1200 | |
| 20260-0400-080 | 4 | 80 | 138.1 | 1,8600 | |
| 20260-0400-100 | 4 | 100 | 171.93 | 1,4700 | |
| 20260-0400-120 | 4 | 120 | 207.4 | 1,2300 | |
| 20260-0400-140 | 4 | 140 | 242.67 | 1,0500 | |
| 20260-0400-160 | 4 | 160 | 275.6 | 0,9200 | |
| 20260-0400-180 | 4 | 180 | 311.49 | 0,8200 | |
| 20260-0400-200 | 4 | 200 | 345.18 | 0,9000 | |
| 20260-0400-250 | 4 | 250 | 431.39 | 0,7200 | |
| 20260-0400-300 | 4 | 300 | 515.33 | 0,6000 | |
| 20260-0400-400 | 4 | 675.3 | 400 | 0,4000 | |
| 20260-0500-100 | 5 | 100 | 170.17 | 2,1000 | |
| 20260-0500-120 | 5 | 120 | 207.49 | 1,7500 | |
| 20260-0500-140 | 5 | 140 | 242.67 | 1,5000 | |
| 20260-0500-160 | 5 | 160 | 273.24 | 1,3100 | |
| 20260-0500-180 | 5 | 180 | 309.04 | 1,1700 | |
| 20260-0500-200 | 5 | 200 | 342.87 | 1,2800 | |
| 20260-0500-250 | 5 | 250 | 432.98 | 1,0300 | |
| 20260-0500-300 | 5 | 300 | 512.51 | 0,8600 | |
| 20260-0500-400 | 5 | 688.61 | 400 | 0,6000 |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.
