The number of required clamps depends on the rope diameter.
The distance (X) between the clamps should be at least 1,5 times the dimension (k).
The distance (X) between the clamps should not exceed 3 times the dimension (k).
The user is responsible for checking the correct installation and the proper rope diameter. Please refer to the instructions in the installation manual.
| Nr. | ø | a | b1 | b2 | b3 | b4 | k | kg | |
|---|---|---|---|---|---|---|---|---|---|
| 30800-0200 | 2 | M3 | 17 | 10 | 15 | 4 | 15 | 0,0100 | |
| 30800-0300 | 3 | M3 | 21 | 12 | 16 | 5 | 15 | 0,0100 | |
| 30800-0400 | 4 | M4 | 24 | 13 | 19 | 6 | 18 | 0,0200 | |
| 30800-0500 | 5 | M5 | 27 | 16 | 22 | 7 | 21 | 0,0300 | |
| 30800-0600 | 6 | M6 | 33 | 17 | 28 | 8 | 23 | 0,0400 | |
| 30800-0800 | 8 | M8 | 41 | 20 | 35 | 10 | 28 | 0,0800 | |
| 30800-1000 | 10 | M10 | 51 | 23 | 45 | 12 | 36 | 0,1500 | |
| 30800-1200 | 12 | M12 | 63 | 28 | 50 | 14 | 38 | 0,2300 | |
| 30800-1600 | 16 | M14 | 79 | 35 | 60 | 18 | 47 | 0,4100 |
Labeling according to the technical drawing. The dimensions of the rope fittings are provided in their unswaged state. During the swaging process, the shaft length extends by up to 6 percent. Technical changes are reserved. The information on this website is provided without guarantee of completeness.
